[Fixed] iPhone 7 Camera and Flash Not Working After Drop?

Asenqua Tech is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

iPhone flash and camera may start malfunctioning after drop. It can be insanely frustrating to fix the same. The iPhone flash may be fixed using methods such as closing the camera app and removing iPhone’s cover if covered.

To fix the camera not working, you may try methods such as forcing shut the camera, restating your iPhone, etc.

Below we have mentioned about each method in detail to fix the error

Solution 1 – Close your Camera app.

Both the flashlight and the camera are powered by LED lights. This means that you can’t use the back flashlight and the camera at the same time. To utilise your flashlight, you must first close the camera app if it is open.

Solution 2 – Charge your iPhone first.

If your iPhone’s battery is nearly empty, the iPhone flashlight will not function. As a result, before utilising the flashlight, make sure your iPhone has enough battery life.

You should also make certain that “Low Power Mode” is not enabled, as this prohibits you from using the flashlight. To see if the mode is enabled, go to Settings > Battery.

Solution 3 – Remove iPhone Cover if Covered

If your iPhone is covered with an opaque cover, it signifies that the flashlight lens is obscured. Examine the iPhone case to ensure that it is not obstructing the flashlight. If it is obstructing the flash, it should be removed.

Solution 4 – Turn the Camera flash ON then OFF.

Because it is most likely trapped in the camera app, your iPhone Flashlight may refuse to work.

If this is the case, go to the Camera app and, under the video area, click on the flash icon. Set the flash on and off to ensure that it is entirely closed before attempting to open the flashlight on your iPhone.

Solution 5 – Restart iPhone.

Minor flaws might cause problems with your iPhone, stopping it from functioning properly. Simply restarting your iPhone is a simple tip that you should always utilise. A simple restart can resolve a variety of issues with your iPhone. You can do so by going to Settings > General > Shut Down. Allow your iPhone one minute before restarting it.

Solution 6 – Check and Install Updates

Pending software updates on your iPhone can cause issues that prohibit the flashlight from operating. To check for updates, go to:

  • Go to Settings.
  • Navigate to the General tab and select Software Update.
  • Select “Download and Install” from the drop-down menu.

Solution 7 – Reset iPhone Settings

You can restore factory settings on your iPhone by resetting its settings, but no data will be lost. To accomplish this, navigate to Settings > General > Reset > Reset all Settings.

Click on the reset button to confirm the pop-up. You can then try to test the flashlight to see if it works.

Solution 8 – Force Restart iPhone

A force restart can assist you in resolving the issue of the flashlight not working. To achieve this, first briefly push the Volume up button, then the Volume down button, and finally long-press the side button until the logo appears.

If none of the suggestions above work, then your iPhone most likely has a hardware problem that only a technician can address. For help, go to the Apple Store.


[FIXED] iPhone camera not working after drop

If you get a black screen or your Camera app frequently freezes, use the instructions below to resolve the issue.

Solution 1: Make the camera close.

Force quit the Camera app if the screen displays a closed lens or a black image. Quickly press the Home button twice. You’ll see thumbnails of recently used apps. Locate the Camera app and dismiss it by swiping up.

Solution 2: Factory Reset the Phone

The simplest way to resolve the iPhone camera issue is to restore your iPhone to factory settings.

To reset all settings, go to Settings > General > Reset > Reset All Settings. It will reset your iPhone’s fabric settings to the factory defaults.

Try the Camera app right now to see whether this approach worked for you. If you can now snap photos again, you are fortunate and can stop reading this post.

Solution 3: Restart Your Phone

Wait for the Apple logo to show after pressing the Home and Power/Sleep buttons at the same time. If you release both buttons at the same moment, your iPhone will restart. Your personal information will not be compromised. After that, check the Camera app.

Solution 4: Reset your iPhone to factory settings.

If none of the preceding steps worked for you, here’s another one to try. Some customers discovered that the Camera app issue was caused by restoring an old backup. If you are experiencing the same issue, you could try erasing your iPhone and resetting it.

It is important to note that all data from your device, including songs, videos, contacts, photos, and so on, will be deleted. So, if you don’t want to lose your important data, create an iCloud backup.

Settings > General > Reset > Erase All Content and Settings to restart your iPhone.

After you’ve chosen your content, you’ll be sent to the “Hello” page, where you’ll be given the option of setting up a new iPhone or restoring a backup. Select the first option and continue with iPhone tuning.

Similar Posts


  1. An interesting discussion is worth comment. I think that you should write more on this topic, it might not be a taboo subject but generally people are not enough to speak on such topics. To the next. Cheers

Leave a Reply

Your email address will not be published. Required fields are marked *