Asenqua Tech is reader-supported. When you buy through links on our site, we may earn an affiliate commission.
Has your Microphone been running into some unknown problem lately and picking up all your sound outputs from the device? If yes, it can cause major interference in even the simplest of tasks you perform on your system.
If you are looking for fixes to the problem, well, this is the article for you. In this article, we have elaborated on five ways you can stop your mic from picking up sound output.
How to stop the mic from picking up sound output?
Below we shall look at multiple solutions that can help prevent your device’s Microphone from picking up sound output:
Run Hardware & Devices / Audio Troubleshooters
If you have an audio system, Windows 10 has a full audio sleuth or troubleshooter that can look for any signs of trouble and recommend solutions. If you want to save time and make sure you get the right help for the issues that we discuss below, you might want to start with the troubleshooter that can automatically find and sometimes even take care of the issues in your system’s sound input and output.
- If you search for “trouble shoot” on your taskbar, you will see an option that says “Troubleshoot Settings.” Select this.
- In the GetUp and Running section, look for the option that says Playing Audio and select it. Then you have to run the troubleshooter by selecting the option that itself says ‘Run the Troubleshooter.’
- There is a new icon on your computer’s screen. To open the new window, you have to select it. There is now a chance to check out different kinds of connected speakers, such as built-in speakers and headphones. You can choose to have your device have default speakers, or you can modify them. When you are done, choose Next.
- Let the troubleshooter run its course and give you a proper re[port on the problem. You may get advice on improving your sound quality or fixing your drivers’ issues from the troubleshooter. If you can see what it suggests, you might be able to fix your problem.
The Microphone is not disabled and is set as default.
You may check if the Microphone is enabled by clicking on the Properties tab and then selecting the Microphone that you want to use. If your Microphone is not disabled by default, it is legit for it to pick up your sound outputs. To disable it, here is what you need to do:
- Type Sound in the Windows Search box. You can open the search box by either pointing and clicking with the mouse on it in the extreme left corner or by pressing the Windows button.
- Now, navigate to Click Sound, and under the Recording tab, right-click on an empty space and then select Show disconnected devices.
- Now, click on Show disabled devices and then navigate to Select Microphone and click on Properties.
- Ensure that the Microphone is not enabled to pick up sound outputs. If it is, simply disable it from the options listed in the window.
- You may also want to check if the Microphone is set as the default sound output device. If yes, then remove it from the default.
Take actions related to Audio Driver.
You can take actions related to the Audio Driver in order to solve the problem with the Microphone picking up all your sound outputs.
To do this, follow the steps below:
- Press Windows Key + X, which will open the Device Manager for you.
- Under the Device Manager, go to Sound, Video, and Game Controllers.
- Next, right-click on the entry and then navigate to the Properties.\
- Next, go to the Driver tab and choose from amongst the following options.
Rollback: If the Rollback driver is enabled, roll it back.
Uninstall: Uninstall Device and restart it to reinstall the device immediately.
Update Audio Drivers
Poor communication between Windows 10 and your sound card or chip can be one of the most common sources of sound problems. This can lead to your sound not working at all or even your Microphone picking up unnecessary sound outputs. Fortunately, you can make your sound hardware compatible with Windows 10. Find the right updates for the job, and you are good to go.
- The relevant result can be found by opening the Start menu and searching for the device manager.
- You can find a list of icon options inside the device manager. Choose the sound, video, and game controllers; you will be able to see a sound card if you have one available.
- Double-clicking the sound card will open the Driver tab, where you can update the Driver. An automatic Windows search will be initiated, which will find driver updates and download them.
- After the update is complete, restart and check to see if your audio works again.
Although the above four steps should fix the problem, here is what else you should consider alongside:
- Windows can’t always find the right audio drivers and updates on its own. If you can’t find what you are looking for, you can look up the sound card on your manufacturer’s website and try to find a method to download the updates.
- If updating doesn’t work, then open your device manager, find your sound card, and click on the icon. Select the uninstall option. This will lead to the uninstallation of the Sound Driver. Restart your computer and try to reinstall the Update for the sound Driver again. This should prevent the Microphone from picking up sound outputs from the device.
Keep checking for updates.
Every modern operating system, including Windows, is constantly being updated with new fixes and improvements, especially for Insider Program users. Sometimes a simple driver update can fix a sound problem, but other times it will take a bit of time.
You might have to be patient as the driver update may not be available right away. A full update may be able to solve a variety of problems since the June 2021 update fixed a problem Windows users were having with certain apps playing high-pitched noises.
Specific driver updates can be useful in fixing issues with a device.
Certain drivers can be found directly from the makers of sound cards, whereas others can be packaged into a Windows 10 update. If you have sound issues, you can either keep an eye on your Windows update icon or contact the manufacturer of your sound card to find out if any updates are available.
It could be as simple to fix a problem if only you are constantly updated and not running on an obsolete version of either the sound Driver or the OS. An update may not be able to fix your device if it’s considerably outdated.
Buying a new computer with compatible drivers is something to consider if none of the methods above fix the issue of the mic picking up sound outputs.
How to fix the headset mic not working?
If your headset mic is not working, we shall walk you through 5 easy fixes to get it up and running again. They are enlisted below:
Fix 1: Allow access to your headset microphone (for Windows 10 users)
For privacy reasons, the third-party applications are not given access to the headset microphone, so make sure that you allow your Windows and the application to access the headset microphone before using it.
Here are the steps to give allow the applications to access the headset microphone;
- Click on Start button > Settings icon > Privacy> Microphone.
- Click on the Change button, and turn on the Microphone for this device if not turned on.
- Allow the particular apps to access the headset microphone.
Fix 2: Set your microphone device as the default
It might happen that your headset mic is disabled, or it is not set as the default device on your PC. In cases, the microphone volume is too low to record your voice clearly.
Here are the settings that you should check;
- Launch the Run dialog by holding the Windows + R key simultaneously. Type in control and hit Enter to open the control panel.
- Select Sounds, then click on the Recording tab. Right-click on an empty place in the device list and select “Show Disabled Devices.”
- Next, Right-Click on the headset microphone and click Enable, and again Right-Click on it and set it as Default Device.
- Now go to the properties of the Headset Microphones, and click on the Levels tab and increase the volume.
- Save the changes, and restart your PC.
Fix 3: Update your audio drivers.
Using the right and updated drivers are very necessary because incorrect or outdated audio drivers may result in improper functioning in Microphone. So it’s necessary to keep the drivers updated.
Updating audio drivers manually can be a bit tricky, so it’s not recommended. Rather you can install drivers automatically by using a software application such as Driver Easy on your PC.
Once you have Driver easy installed on your PC, follow the given steps;
- Launch the Driver Easy application, start scanning but click on the Scan Now button.
- If an update or error is found, just download the latest and correct drivers by using Driver Easy. To automatically update the drivers click on the Update All button in the application.
- Once the drivers are updated, restart your computer and check if the Microphone is working properly.
Fix 4: Close other apps that have access to your headset microphone
Applications like Discord, Skype, Zoom, etc. that use your headset microphone might be running in the background and maybe the reason why your headset mic is not working properly.
To fix this error, shut down the programs that might be using the Microphone and then check whether the problem is solved or not.
Fix 5: Troubleshoot hardware issues
If the problem still persists, it might happen that there is a hardware issue either with your computer or your headset.
Here are some tips to try:
- Unplug your headset, and then plug it into some other port. If the problem is with the jack, it will get fixed.
- If the above solution doesn’t work, try to connect your headset to another computer, and if the problem is fixed, then you should contact the vendor of your PC for further assistance.
- If the above two methods don’t work, then the fault might be in your headset, so contact your headset manufacturer for support.
How to Fix Echo on Your Mic
It’s difficult to hear the same thing again with a delay. There are a few ways to reduce the problems with mic echo on your computer.
First of all, use a headset on calls. When using your laptop’s built-in microphone and speakers, most echoes can be caused by the Microphone picking up audio from your computer’s speakers. The Microphone’s chances of picking up that sound are greatly reduced by using headphones.
Make sure that your microphone sensitivity is not set too high. A sensitive mic in headphones can pick up sound from the headset.
If you are in a video call, you will probably have a Windows setting turned on, which will let you hear everything you say in your headphones. If this occurs, go back to the Recording tab in the Sound section of the Control Panel and double-click your device to go to the Listen tab.
You will hear everything from that Microphone in the selected output device if you have ‘Listen to this device’ checked. In most instances, this will only drive you crazy, as it can be useful in very few circumstances. What you need to do is Uncheck the box and then hit OK if you’d like to stop hearing everything your mic picks up.
Below are a few other things you can try to reduce echo on your headphone:
- Speakers and other electronics should be turned off. If the echo in the Microphone is related to picking up noises from speakers or interference from other electronics, it’s best to turn them off. The Microphone picks up sounds from the electronics to create an echo. A headset is needed to reduce the echo from the speakers.
- You can turn off other recording devices. Sometimes the problem is not with the Microphone but with something else. Changing the features is the only way to stop the echo if recording devices are the ones creating the problem of echo in your mic. Select “Properties” by right-clicking and then locate the audio options and turn off the recording option that isn’t a microphone.
- The internet connection needs to be reset. Poor connection quality can cause a microphone to echo over a game or other services that require the usage of a microphone. Resetting the Internet should likely fix the whole echo problem.
- It’s a good idea to turn off the Microphone when the weather is bad. An echo caused by a storm is not something that can be fixed. The owner doesn’t have control over such issues. If the weather is bad, it is a good idea to turn off the electronic devices as there are dangers to the devices, such as power surge and damage; this includes damage to the Microphone and thus the echo problem.
How to make Cortana pick up voice commands?
Windows 10 has a built-in voice assistant called Cortana, which can be used to give all sorts of commands. If your audio is malfunctioning, Cortana would be of no use. If you can’t get Cortana to respond in the way you wanted, you may have a microphone problem; it is also possible that your desktop or laptop does not have a microphone in the first place.
Make sure that your computer has a microphone. Many laptops and desktops have a microphone, but it is not a guaranteed feature. You need an external device and a microphone jack if you don’t have a built-in mic. These are the best headsets that come with microphones and possibly one of the few options available in case your Windows device does not have a microphone.
If you have a microphone, you need to double-check that your Cortana settings are correct.
- Go to your Windows search bar and click the icon that says “Cortana,” then select the settings icon in the bottom-left corner.
- The voice assistant can do a lot of things, so you have a lot of options to control it. The option for Cortana to listen for Hey Cortana commands needs to be turned on. Voice commands won’t work if she isn’t listening.
Double-checking your recording device settings is worth it if you still can’t hear yourself, even if you have a microphone and a smart assistant.
- You can do this by clicking the Up Arrow in the bottom-right corner of your screen. This option is usually next to Clock and Date.
- You can change the sound settings by right-clicking the Audio icon and selecting Open Sound settings.
- Make sure that your Microphone is selected in the Input section of the settings page.
- Double-checking the volume settings is easy: click the Device Properties and then click the Levels tab. They should be at least 50, but anything from there up to 100 is fine.